How To Repair Siding That Fell Off

3 elementary ways to fix loose siding.

For those of us that live in a vinyl sided house it is something we all  promise that will never happen, but information technology does happen more than often than we like. Information technology could be a poor install, or maybe you had a hard wind storm. That dreaded piece of siding coming loose and hanging at that place unattached from the bottom lath. How are we gonna fix this?

Well curt of violent off your siding, reinstalling it and pull upward at the proper tension…Hither are a couple tricks that you can do to continue that siding together and hopefully it won't come apart once more.

Crimp the bottom of the siding board.

While the siding if unattached and dangling, take your siding snips, or a pair of needle nose pliers will too do the trick. With your snips grab ahold of the bottom runway and give it a twist. Do this every couple of anxiety. For some added insurance, squeeze some caulking into the rails earlier clipping information technology dorsum together. If yous got a good crimp on the bottom runway, you lot are going to take to clasp pretty difficult to click it in. Y'all should feel it click in.  Double cheque y'all pushed up on all the crimps by looking down the line of the board. You volition be able to see if in that location is a bump from a missed crimp. After taking this pace and re-clicking the siding boards together, information technology should never come up apart again.

Your siding will still exist loose, but it shouldn't come apart once more thanks to the caulking and the crimps holding everything together.

Spiral up from the bottom of the siding.

We don't often use this technique to hold siding together, but information technology will still work. Take a 1/2 or 3/four inch long screw, find a drain hole on the bottom of the vinyl siding board and drill a screw up from the bottom.  This locks the loose lath into the lath beneath it. I would spiral every two feet to concord it together. You should be able to get color match screws from Amazon, or your local hardware store that matches your siding color, and so it won't be very noticeable to any onlookers.

For added security, you lot could add caulking to the track before joining the two boards together with the screws.

Just caulk information technology.

This method is our least favorite, equally we feel that it is only not secure enough.  However, information technology will work. Simple drop dabs of caulking into the bottom rails of the loose board.  I would dab caulking every half-dozen-eight inches forth the loose board. Being careful not to put also much in, our when you lot click the boards dorsum together, you could get squeeze out.  If y'all do get caulking clasp out on the front face of your vinyl siding, only wipe it off with a petty flake of mineral spirits.

Conclusion

And with that,  hopefully these three uncomplicated fixes will end that loose piece of  siding from flapping in the air current & from keeping you up all dark.

But if information technology keeps coming apart, telephone call a siding contractor in your area to requite you a mitt problem solving your issue.

Source: https://thesidinggirl.com/fix-vinyl-siding-that-keeps-coming-loose/

Share this post